Rescue Positioning Beacons
The SAR Datum beacons are designed to be dropped from aircraft into water to mark a position during air/sea rescue operations. SAR Datum buoys are manufactured in multiple frequencies and modulation tones to allow a number of these beacons to be in operation at the same time.
Specifications
Transmission:
- 119.05 MHz 238.10 MHz 495 Hz Modulation
- 119.15 MHz 238.30 MHz 700 Hz Modulation
- 119.25 MHz 238.50 MHz 990 Hz Modulation
- 119.35 MHz 238.70 MHz 1400 Hz Modulation
Aerial: 330mm rubber coated stainless steel
Modulation Characteristics: Amplitude modulation, Swept tone.
Activation: Removal of plastic hold off block by a pull cord allowing automatic activation then buoy is deployed
Batteries: Long-life lithium cells (sulphur dioxide free), with a greater than 10 year shelf life, recommended replacement after 5 years.
Dimensions: 25cm high x 8cm diameter – excluding aerial
Endurance: 48 hours minimum – 72 hours when batteries new
Weight: 950 grams
Warranty: 12 months parts and labour

About Us
Kinetic Technology (KTI) has been designing and manufacturing EPIRBs for over 20 years in Melbourne Australia. KTI specialises in designing and developing beacons for commercial and military use.
Sitemap
Kinetic Technology International
KTI has ceased operations. Battery replacement, re-coding and other services are no longer available. Warranty claims can only be processed via your retailer. Most Self-Test problems arise from incorrect product testing. For Self-Test instructions please refer to the instruction manual or our Q&A pages. The Cospas-Sarsat system is not controlled by beacon manufacturers – your KTI beacon remains fully compatible with the Cospas-Sarsat system after KTI factory closure.